Protection Detail | from £200 | 1 day
The Protection Detail involves a single stage machine polish using a fine finishing polish to restore deeper levels of gloss to the paintwork whilst adding clarity and sharper reflections to the finish. The objective with the Protection Detail is to present the exterior of your vehicle in a nicely enhanced and protected condition, providing you with an easy to clean exterior and durable protection against the elements. Offers very light swirl removal but brings the maximum gloss that can be achieved without more intensive polishing.
Enhancement Detail | from £350 | 1 - 2 days
Paintwork is treated to a 1-2 stage correction process, to remove light paint imperfections, such as minor swirl marks to increase the gloss factor. This treatment can provide a noticeable improvement for the older or less maintained vehicle, where it would benefit from extra time using the machine polisher. This service is also beneficial for the perfectionist who wants to remove those unsightly "Dealer Installed" marring, swirl marks, holograms or buffer trails that they like to throw in with every purchase.
Correction Detail | from £600 | 3 - 4 days
Paintwork is treated to a 2-3 stage paint correction process to eliminate defects including medium swirl marks, holograms and fine scratches. Panels are alcohol wiped after every stage to ensure true correction. This is then followed with a refining stage to restore the paintwork back to a deep gloss finish. This treatment will provide a major overhaul for the older vehicle and can achieve 'perfection' or close to perfection for the newer vehicle.
Signature Gloss Detail | from £800 | 4 - 5 days
Our Signature Gloss Detail involves a 3-4 stage machine polish. In terms of removing defects from the paintwork time really is the answer, the more time I have with the machine polisher the higher percentage of defects I am able to remove. Any defects that are deemed unsafe to remove (for example if a scratch is too deep) will be dulled down so they are less noticeable.
For All Paint Correction Services:
The Washing Process
-
Wheels cleaned inside-out including brake calipers using a variety of soft brushes and PH-balanced wheel cleaner.
-
Wheels fully decontaminated to remove iron fallout and tar deposits.
-
Arches cleaned and exhaust tips cleaned.
-
Door shuts and sills pre-rinsed and cleaned using a soft detailing brush and APC.
-
Bodywork extensively washed using snow foam, the two-bucket method, prep shampoo and a Gtechniq wash mitt.
-
A soft detailing brush and APC is used to clean grilles, badges, filler cap area and window sills etc.
Bodywork Decontamination
-
Two stage decontamination process to remove iron fallout/ferrous contaminants and tar deposits from all areas of paintwork.
-
Paintwork, windows and lights are clay barred to remove all final surface contamination.
-
Vehicle dried using 600gsm microfibre drying towels.
-
Gaps, seals and crevices are blown dry to remove trapped water and to eliminate drips.
Machine Polishing
-
Plastic trim and any delicate areas are masked using 3M tape to avoid polish stains.
-
Full set of paint depth readings are taken for the paint correction services to ensure safe correction throughout.
-
Polish and pad testing to determine the most effective combination for your paint type.
-
1, 2, 3 or 4 stage machine polish carried out over the entire vehicle with consistent IPA wipe downs to monitor the true results of correction.
-
Completion of the machine polishing stages when the desired finish is achieved.
-
Paintwork wiped down with IPA (isopropyl alcohol) to remove polish oils and residue to form the ideal surface for wax or ceramic coating adhesion.
Sealant/ Protection
-
As standard, all of our paint correction services include the application of our durable synthetic sealant to provide long-lasting shine and protection for your vehicle. This can be upgraded to one of our ceramic coatings at an additional charge.
-
Please visit our Protection page for further information about our ceramic coating options.
CANCELLATION POLICY
We take pride in being a reliable small business. The lifeline of our business is customer satisfaction and loyalty. This means we deliver the finished product that we promise in the amount of time that we promise.
With this extra touch comes some responsibility on the customer. Cancellations are very costly to our business. Of course we anticipate things like bad weather and understand that emergencies happen. But we ask that you try has hard to keep all appointments with us as we do for you.
Cancellations of less than 24 hours notice will incur a charge of up to 100% of the price of the service, payable prior to any further appointments.